Resin Technology and Product

Special Resin-QFC Series

for organic wastewater resources or biochemical effluent water quality upgrade

Application Fields

Customers who have the need to recycle organic material, whether it is an organic reaction material or high value components of the final product.
Especially for benzene and naphthalene- based organic matter that cannot be degraded or enriched.
biochemical effluent water and various end treatment standard upgrade

Application Features

Suitable for the adsorption of aromatic ring, hydrophobic and non polar organic compounds
Wide application range and good applicability. The concentration of organic matter ranges from several ppm to tens of thousands of ppm and can be processed and can applied to high salt, high acid and alkali waste water.
The resins are characterized by large specific surface area, high adsorption efficiency as well as easy desorption and regeneration. The adsorption rate is above 99%, and the desorption rate is above 95%.
In addition to this the resins have a stable performance, long service life, low loss.

Product catalog

Special Resin	Main Application
QFC-410	for wastewater containing p-nitrophenol, o-nitrophenol, salicylic acid.
QFC-401	for wastewater containing 2,3 –2,6 – napthoic acid.
QFC-402	for wastewater containing o-chloroaniline、paracetamol and aniline.
QFC-403	for the treatment of wastewater containing 2-naphthol .
QFC-404	Mainly used for the recycling of aspartame wastewater.
QFC-405	for wastewater containing phenol、aniline、organic acid、nitro compounds.
QFC-406	for wastewater containing P-aminoanisole, O-aminoanisole.
QFC-407	For wastewater of M-cresol, hydroxybenzoic acid, phthalic acid, and trimethylhydroquinone.
QFC-408	for wastewater containing 2,3-acid, spicy acid, hydrobromic acid, salicylic acid、organic acid.
QFC-409	To treat wastewater of Guaiacol and vanillin.
QFC-499	for wastewater containing benzyl alcohol, phenylethyl alcohol and benzaldehyde.
QSP-504	non-polar resin, for the extraction of polyphenols, acids, alkaline and anthraquinones.
QFC-420	Polar resin，for the extraction of polar compounds.
other product	New products can be developed based on customer demand.

The specialized resin-QHM

for heavy metal recovery and quality upgrade

Application fields

Application characteristics

Different water quality: choosing the right resin which can achieve the best treatment effect
The form of the metal ions has a great impact on the resin selection and a direct impact on investment prices
Removal and recovery of heavy metal ions in high salt and high organic solutions
Wide range of applications: can handle metal ions concentration ranging from several ppm to several thousand ppm in raw water
The concentration of metal ions in the effluent can be controlled below the ppb level, which is conducive to comprehensive management

Special resin	Main Application
QHM-110	Extraction of vanadium pentaoxide，strong Adsorption to partially vanadate.
QHM-490	Extraction of tungsten and molybdenum .
QHM-400	Extraction of gallium using acid .
QHM-450	Extraction of gallium using alkali.
QHM-100	Extraction of rhenium.
QHM-200	Recovery of gold, platinum, palladium and rhodium.
QHM-515	Extraction of rare earth elements.
QHM-807	the refining of precious metals. Separate Fe3+ from precious metals.
QHM-806	Extract Fe³⁺ from concentrated hydrochloric acid.
QHM-804	Extraction of mercury.
QHM-820	Extraction of copper, nickel and zinc
QHM-420	Extraction of hexavalent chromium ion
QHM-303	The selectivity of metal ions is similar to that of EDTA. Selective order is as follows：Hg＞Cu＞Pb＞Ni＞Cd＞Zn＞Co＞Mn＞Ca＞Mg＞Ba＞Sr＞Na
QHM-304	good exchange adsorption properties for divalent metal ions.
QHM-805	Extraction of boron. high adsorption capacity
QHM-803	The arsenic (As-III to As-IV) oxide can be reduced;
QHM-430	Extraction of boron in acid
QHM-470	Removal of tungsten in molybdenum solution
QHM-140	Extraction of uranium sulfate from sulfuric acid solution
QHM-118	Uranium recovery

The special resin-QAN

used to remove contaminating ions

Application scope

Customers who has need to reduce or remove special ions.

Application characteristics

The type and concentration of interfering ions have a significant effect on the removal of contaminating ions
The concentration of contaminating ions should not exceed 1%
The concentration of contaminating ions can be controlled below the ppb level

Special Resin	Main Application
QAN-801	remove F^–in natural water, will not introduce other ions in water.
QAN-120	Used to remove nitrates from fresh water.
QAN-130	Used in the removal of nitrates from seawater.
QAN-410	Used to remove nitrate and sulfate ions from industrial wastewater.
QAN-480	remove sulfates, nitrates and chlorides from wastewater produced in pharmaceutical and food processing industries.
other	remove contaminating ions based on customer demand.